Ask Experts Questions for FREE Help !
Ask
    bishman6's Avatar
    bishman6 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 24, 2012, 04:57 AM
    Gmpn100-4 goodman
    My inducer fan starts and the igniter starts to glow. The blower does not come on. It will not ignite. I hear a click like the gas wants to come on then the igniter goes out.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Sep 24, 2012, 05:35 AM
    My inducer fan starts and the igniter starts to glow. The blower does not come on. It will not ignite. I hear a click like the gas wants to come on then the igniter goes out.

    Try cleaning the flame sensor with steel wool or sand paper.
    zeustogo's Avatar
    zeustogo Posts: 14, Reputation: 1
    New Member
    		  
    #3

    Sep 24, 2012, 08:50 AM
    It also sounds like it is not sensing the inducer fan. Check your connections from inducer fan to gas valve.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #4

    Sep 24, 2012, 07:43 PM
    Make sure the knob on the gas valve is set to "on" & the manual valve in the gas piping external to the furnace is turned on.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Furnace Model GMPN100-4--No Heat [ 3 Answers ]

The inducer fan motor starts,the hot surface igniter heats up and the gas valve opens producing a nice blue flame for 3 or 4 seconds and the gas valve shuts off. There are no red flashing lights to indicate a problem with any components. This unit was built around 1993. Any ideas on what might be...

Goodman Gmpn100-4, Fan works- no heat! [ 12 Answers ]

Hi, I have a Goodman, Dependable 92, Gmpn100-4. THe fan works, but the heat doesn't. There are no indicator lights that flash(red). The ignitor glows for about 3 seconds and then shuts off w/o lighting the furnace. Any help would be appreciated.

Goodman ac model gmpn100-4 [ 1 Answers ]

On the control panel circuit board b18099-13 I would like to know where the red blue and black wires from the blower motor connect to this board were these wires conect are m1 m2 heat cool and eac are a couple for speed control I would like to make it run faster the air coming out is like on...

11 year gmpn100-4, stops working after 5 minutes of running [ 4 Answers ]

Hello, I have a 11 year gmpn100-4 which stops working after 5 minutes of running. Called a technician and he is suggested that the heat exchanger is cracked. He also showed me flames coming out of the combustion chamber which he says indication of cracked heat exchanger. Question, should I...

Goodman a/c [ 1 Answers ]

Heyi'm new at this. Looking for wiring diagram for goodman a/c phkj 060-1 a/c heat pump. All I can find on the internet are questions & more questions. Thanks in Advance triggerjunbug, ala.

View more questions Search