Check out some similar questions!
Concord 80 plus air handler blower motor does not run in cool mode or heat mode.
[ 0 Answers ]
Shut off furnace switch to service coil. Coil is clean, replaced covers and turned on furnace switch and now the blower /indoor fan will not run. No power from control board at terminal marked"cool" placed it on terminal marked continuous and will run. Could this be a bad solid state relay K2,...
Blower motor won't shut off in heat mode but works fine in A/C mode
[ 0 Answers ]
I have an older lennox unit that is pilot light. The blower motor won't shut off when the temp is reached on the thermostat but it works fine in ac mode. What could cause this? I'm confused because it worked 2 weeks ago when I turned my ac off and the thermostat is in auto and only shuts off when I...
Blower in furnace works in heating mode, not in cooling mode
[ 5 Answers ]
The furnace is an older model Carrier. I do not know at this time the exact model. It is at this time about 20 years old. The central air is a newer Carrier Performance series model. It is two years old. I have checked to make certain the blower moves freely; it does. The blower in the...
My central heat and air keeps freezing up what do I need to do to stop this it works
[ 2 Answers ]
My central heat and air keeps freezing up what should I do to stop it
Carrier A/C Blower will not come on in A/C mode but works when in heat mode
[ 3 Answers ]
I need some guidance. I have a Carrier A/C unit that has been working fine. Last night the fan stopped working for some reason in the A/C mode. But when I put the heat on, it works fine. The compressor and condenser work fine but the A/C fan just will not kick on. I thought it might be the... View more questions Search
Add your answer here.
|