Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Diagram on wiring 3 lights & 1 outlet in 1 3 switch gang box?
[ 1 Answers ]
You provided a diagram of 1 gang box controlling 3 lights and 1 outlet before. I can't seem to locate it. Can you please Master of all Electricians please provide another? One of many who appreciates your knowledge, Sonia galicia Email: [email protected]
Middle outlet in 3-gang not working
[ 3 Answers ]
I have a 3-gang box in my kitchen with one paddle switch and two outlets. Worked fine for 3+ years. All of a sudden the middle outlet is not working. No problems with the switch or the other outlet. What might cause this problem, and will simply switching out the middle outlet solve the...
To pigtail or not to pigtail -- wiring double gang box
[ 4 Answers ]
I would like to wire a double gang box with two pair of receptacles on the same circuit and not switched. Technique 1: One source told me it is preferable to pigtail hots, neutrals, and grounds to each receptacle in the box so that a possible future receptacle replacement might be easier. ...
2 GFCI Feed thrus in double gang box
[ 1 Answers ]
Is it okay to install 2 GFCI feed through outlets in 1 double gang box? With both GFCIs installed there is only about 1/4" between the side terminals due to there bulky size. Just want to make sure it's okay.
How many double-gang outlets can one put on one 20A circuit?
[ 2 Answers ]
Got a 3rd car garage. Installing 4 wall plugs - double-gang. That's 4 plugs per box. Anyway, I'm using 12 ga wire to do the job. Want 20 amps to power tools with. Don't want to 'run out' is what I'm thinking. The 'extra plugs' are for lights to see by, or any thing else that might need power.... View more questions Search
|