Ask Experts Questions for FREE Help !
Ask
    sls33's Avatar
    sls33 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 19, 2012, 11:09 AM
    Electrical Wire Repair
    The sheathing on some wiring was cut and has now exposed some very fine wiring on a boat wire that will be exposed to water. Luckily, the wiring itself was not cut and the piece of equipment still works. On each end of the wire, there is something that a piece of shrink tubing can not fit over to slide it to where the exposed wiring/cut sheathing is. Does anyone have any good ideas on how to successfully waterproof these exposed wires? Thanks.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 19, 2012, 04:28 PM
    Get some of this Google at hardware and auto parts stores
    sls33's Avatar
    sls33 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 19, 2012, 04:50 PM
    Awesome. Thank you for your help! That should work just fine.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My contractor blew out an electrical outlet. Who is responsible for repair? [ 16 Answers ]

My contractor plugged in a power tool and my electrical outlet was overloaded. Who is responsible for repairing it?

Romex wire repair? [ 2 Answers ]

Stan if your out there I swear this is my last question... is it OK to place electrical tape over the romex wire if I were to perhaps accidentally knick it or perhaps staple it a bit harder than I intended, or do I need to completely do the run over? And as a secondary question in reference to...

Electrical -Can I use 12 wire to wire lights? [ 2 Answers ]

Can I use #12 wire to wire lights, fan and switch from the panel to the light ? The breaker Is a 15Amp single pole.

View more questions Search