Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace Gives Heat but Cycles Frequently
[ 16 Answers ]
OK, Labman and others proved very helpful in the past with my ignitor problem so now I have another question: How long should a proper furnace run between cycles? I have read about the flame sensors and "limit switches" but I'm not sure if this is related to either. My heater seems to go...
Furnace cycles evry two minutes
[ 5 Answers ]
I have a 15 year old 70000 BTU high efficiency gas furnace, and it is cycling every 2-3 min and the house is COLD (about 10 degrees lower than comfortable) The small exhaust fan comes on, the igniter turns on, the pilot turns on, the pilot sensor heats up and then the main gas goes on and burns,...
Furnace blower cycles with Thermostat off
[ 2 Answers ]
Have Goodman Furnace built 1994. Worked fine until about 3 weeks ago. It starts cycling, and the heat icon does not show on the thermostat. I turn the thermostat off, the furnace continues to blow. Last night to verify, took the thermostat off the wall (but still had the furnace plugged in and... View more questions Search
|