Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New breaker, 1 outlet, no power at outlet
[ 2 Answers ]
We have installed a new circuit breaker to the box for an addition in our home. After wiring the first outlet to the new circuit we tested and do not have power to the outlet. After checking the breaker making sure it was not tripped and double checking the connections on the outlet, we still do...
Power From Junction but No Power to outlet
[ 0 Answers ]
I have an outdoor light and ceiling fan in a cabana. The fan is on the same circuit breaker as my pump for the fish pond. The pump is still working but there is no power coming out of the ground up to feed the switch for the fan/light. I have tried to trace the wires from the box on the house,...
Electrical partial-power-loss power to the outlet on one side and the ground
[ 2 Answers ]
I have partial-power-loss as a result of a heater and christmas tree plugged in the same line in my home. The problem I 'm having is that each outlet that was affected still has 115V on ether side and ground , is this the result of a hot attaching itself to ground somewhere in my wall? And how...
Grounding fridge to outlet
[ 4 Answers ]
Can I simply connect a wire (copper) to the back of the fridge by a pre-existing screw and connect to the outside of the socket box to the screw that keeps the cover on
Wire Motor for 220 outlet Power from 110 power
[ 1 Answers ]
I need to wire this sander for 220 power and do not understand the diagram well enough. Currently I believe it is wired for 110 shown in picture. Please advise about correct wiring for 220. Thank you 2 attachments View more questions Search
|