Ask Experts Questions for FREE Help !
Ask
    rmajoran's Avatar
    rmajoran Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 16, 2012, 11:16 AM
    Connect Hunter Ceiling Fan w/ Harbor Breeze Remote
    Hello,

    I have a Hunter ceiling fan (which I bought a few weeks ago and is installed). It only has 3 wires (because the light plugs into a connector at the base of the fan). The wires are Black, White and Green (ground).

    The Harbor Breeze remote wants me to connect 3 wires to the fan:

    WHITE (to Motor N)
    BLUE (for Light)
    BLACK (to Motor L)

    Is this even possible seeing that there is no wire accessible specifically for the light?

    Thanks for your help!

    Ray
    AnswerMan5000's Avatar
    AnswerMan5000 Posts: 186, Reputation: 3
    Junior Member
    		  
    #2

    Sep 16, 2012, 11:21 AM
    Hi there,

    This article is very good for help with wiring your ceiling fan including wire colors , etc.

    You can also check this page for replacement harbor breeze remote controls.
    rmajoran's Avatar
    rmajoran Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 16, 2012, 11:25 AM
    Quote Originally Posted by AnswerMan5000 View Post
    Hi there,

    this article is very good for help with wiring your ceiling fan including wire colors and etc.

    You can also check this page for replacement harbor breeze remote controls.
    Thanks for the links, however, they were not helpful. The first link only refers to fans with 4 wires. Mine only has 3. The second link refers to Harbor Breeze Ceiling Fans. Mine is a Hunter.

    Sincerely,
    Ray
    AnswerMan5000's Avatar
    AnswerMan5000 Posts: 186, Reputation: 3
    Junior Member
    		  
    #4

    Sep 21, 2012, 09:30 AM
    Hello, sorry they were not helpful. You could try to purchase a Hunter ceiling fan remote, which is more likely to work with its own brand.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing a Harbor Breeze remote on a hunter ceiling fan [ 1 Answers ]

The fan is a combo fan and light, fan has three wires black, white and one black with white stripe. Remote has black, white and blue for light, fan does not have designated light wire, the black with white stripe is in the event you want a 3 way switch. Where does the blue wire go?

How to wire a Hunter Fan using an old Harbor Breeze remote [ 2 Answers ]

I've just purchased a new Hunter fan with light assembly and was told I could use the receiver and remote control out of the old Harbor Breeze fan (also with light assembly) that I was replacing. I've wired the old Harbor Breeze receiver to the ceiling wires, black to black and white to white. The...

New Hunter Ceiling Fan connecting with Harbor Breeze Remote [ 7 Answers ]

Ok. Here is my situation. I have a new hunter ceiling fan. The box in the wall has a white, black, and red wire. I have attached the two green ground wires. The remote receiver has ac black and ac white on one side and white, black and blue on the other side. The fan has white, black and...

Wiring a Harbor Breeze Universal Remote to a Hunter Ceiling Fan [ 5 Answers ]

Hunter Ceiling Fan Model #: 21871 Harbor Breeze Universal Remote Model # 43147 The Ceiling Fan has: The black & white wires for the motor, And red, pink, yellow & gray wires The Remote has: The black & white wires for the motor, And ONE blue wire for the lights

Harbor breeze fan with hunter remote [ 1 Answers ]

I pulled the fan from another room where it was working fine to put it in another bedroom. When I hook up the wiring according to the receiver I get nothing from the fan. When I bypasseb the remote receiver I got only the fan spinning and the lights wouldn't turn on. I didn't note the wiring when I...

View more questions Search