 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Spa Disconnect Panel
I have a Midwest 50A GFCI disconnect panel supplied by spa dealer. Using #6 wire and 3/4" PVC conduit. The supplied panel has a 3" round hole in the top with a square cover attached by 4 screws. On the bottom of the panel are knockouts. I would like to supply power to the box from the top since conduit exits the house from above, and then run conduit out the bottom to supply power to tub. Can anyone tell me what the hole in the top of the box is for, and can I just drill a hole with my step drill in the cover and use connector ? I really don't want to use flex to curl around and under the box into knockouts to supply the disconnect.
|
||||
Check out some similar questions!
Trying to install midwest spa disconnect and the spa doesn't have a white neutral connection at the spa panel. It has a bare neutral, blk wire, red wire connection. Should I take the white neutral conn, to the bare wire grnd conn.
I finally purchased a spa and I think I have convinced myself that it makes sense to mount the disconnect on the side of the house, running 6/3 romex inside and then using #6 THWN in PVC conduit to connect to the tub. My question today is about the disconnect. To avoid needing to use THWN back to...
I'm installing a spa with a Midwest Electric 60A GFCI spa disconnect panel (#UG412RMW260P)between the spa and the house main service panel, but I'm confused which lugs in the disconnect box to connect the "hot" wires (Red & Black) to from my house service panel? This panel has two sets of lugs...
In a spa installation does the GFI breaker go in the disconnect box or main panel?
Does the spa box count as the disconnect or does there need to be one somewhere else? I am building a 12'x12' gazebo and the spa box will be on the outside. The wiring is going to come up through the concrete in steel conduit. To add a disconnect somewhere else would put it somewhere in the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
