Ask Experts Questions for FREE Help !
Ask
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #1

    Sep 15, 2012, 07:23 AM
    Tile Wet Saw
    On a tile wet saw. It states 7"continuous Rim Diamond Blade
    Abor Dia 1"

    Does that mean a 5/8 abor will not fit. What exactly am I looking for.
    Is the arbor adjustable. Harbor Freight $59.00
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Sep 15, 2012, 10:26 AM
    That means the saw has a 1" abor shaft. Must use blade with 1" hole in the center. Some blades are 5/8 but have 1" knock out.

    Should note that blade is sold separately.
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #3

    Sep 15, 2012, 10:28 AM
    Very Good thanks for the explanation
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Can a existing wet line with a vent exiting on the upper part of the wet pipe be used [ 2 Answers ]

Can a existing wet line with a vent exiting on the upper part of the wet pipe be used for a 2nd bathroom being contemplated for a 2nd floor farmhouse. Both the wet line and waste vent are both located in the basement. They were installed for a first floor bathroom. Please see attached pictures.

Shower Wet Tile [ 4 Answers ]

We noticed in our bathroom shower (built about 2 years ago) a wet spot (see attachment). This was noticed in the morning so the everything else is dry except that area and the faucet is not leaking. It is so frustrating after the money we spent. The area with the arrow is actually wet and as I...

Shower floor tile and grout remain wet looking [ 1 Answers ]

I have a new shower with 2X2 marble slate flooring. After each shower I take an area of "wet looking" tile and grout expands. I read up on it and seem to think that the drain weep holes may be clogged but my contractor doesn't think so (but hasn't checked to see which would mean taking out the...

Shower tile floor and grout remains wet looking [ 1 Answers ]

I have a new shower with 2X2s marble floor tile. Every time we take a shower an area of dark, wet looking tile and grout expands. Soon my entire floor will look that way. I've done some research and think that the drain weep holes may be clogged causing water accumulation to saturate my floor...

View more questions Search