 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
John deere l130 deck not working
I recently replaced my wire harness from the pto clutch to the seat and the switch on a john deere l130 . Now the deck is not moving.. The engine runs fine no problems. When I go to engage the pto switch it shuts the engine down. When I put the parking break on and stand up engine still runs.. . What could be causing the deck from not working?
|
||||
Check out some similar questions!
I have a John Deere L130 lawn tractor and when I pull the PTO switch to engage the deck the mower tries to die and won't engage the deck. Could it be that the PTO switch is faulty and needs to be replaced or is it something else that's wrong ?
Always smokes a little when it cranks, but now smokes a lot for a couple of minutes . Then blue smoke clears up. Runs great. Kohler has plenty of power. What's the problem valve seals, breather or what
The engine runs fine for as long as I want it to until I pull that knob. Then it sounds like it want s to work and just dies. The belts don's spin at all when thi is occurring. Primary wheel located beneath the engine which drives the belts doesn't seem to spimove the belts. I am considereing...
My John Deere L130 will start but only run for a second. I can do this several times at full throttle and full choke and it only runs for a second or two. If I retard the throttle to 50% it will run a few seconds longer but that's it. I know this must be a fuel flow issue but the filter liooks...
Concerning my 3yr. Old John Deere riding mower L130 w/23HP Kohler engine. The pedals that you depress to make it go forward and backwards seem to have lots of slack or looseness in them. My neighbor has the same machine and his has no looseness and respomds to foot movement quickly. Can this be...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
