Ask Experts Questions for FREE Help !
Ask
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #1

    Sep 11, 2012, 03:59 AM
    Mounted Bathroom Accessories
    On the chrome soap dish and toothbrust holder that attach to the wall by way of a clip that is attached. By first drilled into the wall, with plastic anchors and screws. Question is should they be mounted before ceramic tile installation or after the installation.Will I need a ceramic bit?
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
    		  
    #2

    Sep 11, 2012, 04:20 AM
    Of course you will have to apply them after the ceramics are done; otherwise how would you cut around everything ! You will need a ceramic bit because the ceramic will shatter unless you use the proper equipment.
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #3

    Sep 11, 2012, 04:28 AM
    Very good wanted to be sure
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Replace or repair wall mounted toilets-change to floor mounted? [ 3 Answers ]

I have an older home with wall mounted toilets ‘back to back‘ in adjacent bathrooms. One of the toilets is damaged and needs to be repaired or replaced. Both toilets have deposits built up over the years. Would it be more cost effective to replace one or both of the toilets with new wall mounted...

Wall mounted bathroom heater [ 1 Answers ]

I have a 1970's electric wall heater unit that does not work. It is flush with the wall; has a metal grate cover; a single circular ceramic tube center and sits in a metal box. I have searched the internet extensively for a replacement unit... does anyone know where I might find one or if I can...

IPTV accessories [ 1 Answers ]

For IPTV connection my ISP requires one SED(Smart Electronic devices), one ADSL2+ CPE Modem and one Splitter. Broadband line from ISP enters to Splitter. From Splitter one line goes to Telephone, another to Modem. From Modem, one line goes to Computer and another to TV via SED. What is ADSL2+ CPE...

View more questions Search