 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Code 72 thermal cutoff on a carrier heat pump
My status light (amber) flashes seven times and then two times so I assume that is a 72 code. On the inside pannel it says 72 is a "Thermal cutoff" event, but I cannot find anything to tell me what that means.
Carrier website is no help. Heat and fan works, but the air conditioning stopped working this morning and the house fan will not run in cool mode. The coupling joint at the condenser outside frosts up. Any ideas? |
||||
Check out some similar questions!
What I believe to be the thermal cutoff sensor on my Whirlpool LER4634EQ0 electric dryer has no continuity when the dryer is off and cool. Is this normal? The dryer runs, but will not heat. I have continuity at the thermal fuse, thermostst near the heating element, and the heating element. The...
Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump
I have a new Carrier Infinity 25HNA636A310 compressor. Does it run in both speeds when in heat mode
Hello, I have an older York heat pump model # E1RC030S06A serial # EEEM176773 that I would like to wire a White-Rodgers # 2B61-186 outdoor temp cutoff themostat into. Can this be directly wired into the outside unit or does it have to be mounted outside and wired into the air handler/heat...
Want to know the location of thermal cutoff switch on Y Magic chef electric dryer so that I can replace with new one. Model # YE/YG225LV
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
