Ask Experts Questions for FREE Help !
Ask
    jim7349's Avatar
    jim7349 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 8, 2012, 06:50 AM
    How to wire 3 fans/light with 1 power saurce
    I am doing new construction. I want to wire 3 separate fans/w lights .Fans and lights on separate switches with 1 new power source.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Sep 8, 2012, 10:53 AM
    Search "electrical and lighting ", there was an identical post with a diagram a couple of days ago.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What wire is needed for 2 ceiling fans on 1 switch no light? [ 1 Answers ]

First time user. In the process of finishing off my detached 32x48 shed and in the process of pulling wire. Looking to install 2 Industrial ceiling fans that will be controlled by 1 switch (capable of running multiple fans). The fans will not have a light, but looking to control both in tandem,...

Casablanca fans 2 wire light pull chain replacement [ 1 Answers ]

Where does the blue wires hook up

How to wire 2 power sources to light [ 0 Answers ]

I'd like to install a light in a car and connect ignition wire to led light so it would light up as soon as I start the car but at the same time I'd like to have a power source from a dome light in case if I open the door the light will go on. How can I wire 2 power sources to the single bulb...

How do I wire two new ceiling fans to replace two existing light fixtures? [ 9 Answers ]

In a bedroom I have two light fixtures that operate off one wall switch. I want to replace these existing fixtures with two new ceiling fans with lights. I am assuming I will need a new type wall switch. What will be the wiring sequence I need to consider?

I have a switch with power to it and wire going to a light,a wire going to outlets [ 3 Answers ]

I have a switch box with power to it and wire going to a light to the left out of the switch box and a wire going to outlets to the right out of the switch box. How do I wire the switch to make both the light and the outlets work properly?

View more questions Search