 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi there, does your light kit have a glass canopy or area that will unscrew? Are you able to find any screws on the light kit in order to access the bulbs?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Ok, here's the deal. I have a Harbor Breeze ceiling fan w/light assembly. I've had it about 8 months and it uses the 40 watt candelabra lights. I was sitting in the room with the fan and all the sudden the one of three lights got really bright. Because they are normally not very bright I...
Harbor Breeze moonglow ceiling fan has a z shaped metal piece in the bag with the plastic lock tab. What is it for?
I own a Harbor Breeze 42" Vector Elite ceiling fan. A little while back I took the fan down to do some renovations to the room and paint. The problem arose when I put the fan back. The fan doesn't have a remote, but it has two pull chains, one for the fan speed and one for the three spot lights...
In July 07 I put up a HB Ceiling Fan. Everything worked properly until 1 week ago the lights would not work. The fan has slowed down. Each is on its own switch. What's the problem?
Harbor Breeze fan is about 2 years old. Top lights and bottom lights. Problem is with the bottom lights. Bottom lights are PAR 20 - 50 watt halogen bulbs. When the bottom lights are first turned on, everything works just fine. Dimming, turning on and off. After the lights have been on for a...
View more questions Search
|
