Ask Experts Questions for FREE Help !
Ask
    lanely's Avatar
    lanely Posts: 6, Reputation: 1
    New Member
     
    #1

    Sep 5, 2012, 01:25 PM
    Triton shower
    Bought a triton shower the inlet is made of hard plastic ,instructions say to use a 15mm compression joint but when I put it on hand tight the compression joint was not gripping, could not tighten any more as there was no thread left, what can I do?? Thanks
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Sep 6, 2012, 07:22 AM
    nstructions say to use a 15mm compression joint
    15mm= 5/8ths.
    Did the instructions say if the 15mm was ID or OD? Makes a BIG difference. Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Triton T100e Electric Shower [ 1 Answers ]

I purchased a Triton T100e Electric Shower on 27th January 2012, this Was installed two weeks later and has worked perfectly until March. Then when switched on, only cold water would flow and changing the temperature Had no effect on the output and everything else was normal. The Triton...

Triton T100si Electric shower [ 0 Answers ]

All had been working fine for few years, now experiencing Low pressure indicator light flushing and no water flowing through and suggestion?

Triton shower [ 0 Answers ]

I have noticed the hot water is getting colder at the same heat setting,I have been told the shower tank in getting furred up,I have found out that vinegar or lemon juice can de furr the tank,but which is best,can any body help,

Triton shower cut out and hasn't come back on [ 0 Answers ]

Our shower started to cut out and come back on a few minutes later, then it cut out and hasn't come back on since. The power light is still on but no water is coming out?

Triton T80I shower [ 3 Answers ]

My shower only let out cold water even when I put the temperature up, can some one help me


View more questions Search