Ask Experts Questions for FREE Help !
Ask
    paplgo's Avatar
    paplgo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 4, 2012, 01:04 PM
    Hampton bay ceiling fan light works fan doesn't
    Recentle (Sunday) installed a ceiling fan with light. Before disconnecting the old fan/light because the fan didn't work we made note of the wire connections. Black to black white to white and blue to red. The unit is controlled by a wall switch. The lights work but the fan doesn't.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Sep 4, 2012, 02:39 PM
    Make sure the black / black wire nuts are tight and that power is getting to and through the switch.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Ceiling fan direction light works not the fan doesn't [ 0 Answers ]

PUT IN NEW CEILING LIGHT WITH FAN. Light is working but fan doesn't ?

Hampton Bay Fan w/ Remote: Light Works, Fan Doesn't [ 4 Answers ]

Sorry if this has been answered elsewhere but I couldn't find what I was looking for. I just installed a Hampton Bay Andover fan w/ remote (no pull chains) but the fan won't start. The light fixture works fine (using the wall switch remote) but I can't get the fan going. I tried the reverse...

View more questions Search