What type of oil does my yard machine 14.5hp OHV takes

figfueira Posts: 1, Reputation: 1

New Member

Sep 3, 2012, 10:47 AM

What type of oil does my yard machine 14.5hp OHV takes

Need the type of oil to use its low don't want to run it like that

crigby Posts: 4,343, Reputation: 107

Outdoor Power Equipment Expert

Sep 3, 2012, 11:07 AM

Hi,
Generally 30Wt of SG or higher rating.
Peace,
Clarke

Add your answer here.

Check out some similar questions!

Yard Machine 42" 18.5HP B&S [ 1 Answers ]

Hello, My name is Mark I've currently was given a 1999 yard machine 42" cut 18.5 B&S lawn tractor. Last year the tractor ran great. Now this year it will not turn over at all. I assumed it was the battery and I charged it and it still wasn't turning over so I ran a direct 12v to the starter...

Briggs & Stratton 14.5 OHV Yard machine. [ 1 Answers ]

Worked fine up until mid-summer. Changed the fuel filter and now it just fills the crank case w/gas and naturally won't fire. I tried reversing the filter as well. Any suggestions?

I have a yard machine 16.5hp I/C ohv model#13an682g129 [ 1 Answers ]

I was cutting the grass when the mower just took off like it switched to a higher gear by itself I tried to engage the clutch/brake but it did not help I tried to switch to a lower gear but that did not work either I had to turn the key off to get it to stop did something come loose on the trans...

MTD Yard machine w/B&S 12.5hp ohv won't start. [ 1 Answers ]

It was running fine and while in the midst of cutting, it died and when trying to restart, it would just click. I initially thought starter, so I rebuilt and it is working fine when benchtested. I moved over to the solenoid and replaced as I had a new one to begin with. Tested batter as well,...

Yard Machine with 14.5HP Briggs won't turn over [ 3 Answers ]

I have a Yard machine lawn tractor that has been running great. Today my wife said it died on her. I tried to crank it and can only get it to turn over one revolution. Have had the battery tested and they told me it was good. Tried hooking jumper cables directly to the starter but have the same...