How to calculate weight of plastic pvc pipe when dimensions are known

gincol Posts: 1, Reputation: 1

New Member

Aug 31, 2012, 02:12 PM

how to calculate weight of plastic pvc pipe when dimensions are known

PVC pipe.

If Inner diamater = 114mm
Thickness = 5mm
length = 14ft
What is weight of this length of pipe?

paraclete Posts: 2,706, Reputation: 173

Ultra Member

Aug 31, 2012, 04:19 PM

Have you tried asking your question on the Plumbing Board?

Add your answer here.

Check out some similar questions!

How to weight pool steps with pvc pipe [ 0 Answers ]

I GOOGLED my question and found a partial answer as a result. When I Clicked the link, the page no longer existed. I will try anything except sandbags that don't last. PVC pipe sounded really good. Thank you. Can anyone help?

Does older PVC pipe fit with newer PVC pipe [ 6 Answers ]

I need to replace the piping underneath my sink and the union I bought does not thread up with the old existing part. If I use a new 1 1/2" coupling, will it fit snuggly with the old existing 1 1/2" pipe or have the sizes changed over the years. I will have to cut the pipe and install a coupling...

2" PVC pipe weight capacity [ 3 Answers ]

I am looking to find the maximum weight that can be put on a 2" schedule 40 PVC pipe. I have to move a 12 x 24 shed about 25' & turn 90 degrees. Any help hill help.

Mixing abs plastic pipe with schedule 40 plastic pipe [ 1 Answers ]

I need to add a drain and there is existing schedule 40 plastic pipe, can I cement abs plastic pipe to the schedule 40 using multi purpose cement?

Plastic PVC Broken in Metal Pipe Joint [ 2 Answers ]

Was digging in the yard and broke the PVC pipe connected to a metal pipe inside the joint. The PVC and joint is 3/4 inch however the PVC is glued inside the metal and now I can't get the old PVC out of the metal joint to replace it. I don't have any tools to cut the metal pipe. Is there anything...