Ask Experts Questions for FREE Help !
Ask
    harmesm's Avatar
    harmesm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 30, 2012, 02:21 PM
    Generator Transfer Switch
    I purchased a generator transfer kit that came with a 4 prong 30 amp cord that connects the generator to the transfer kit. The problem is that the outlet on my generator is only 20 amps. Can I remove the 30 amp plug and install a 20 amp plug leaving the 30 amp plug at the end that plugs into the transfer switch?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Aug 31, 2012, 02:30 AM
    Yes, however, you will be limited to the 20 amp output of the generator.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Question regarding transfer switch for generator. [ 2 Answers ]

I have a 60 amp 10,000 watt generator and need to purchase a manual transfer switch, but what kind? I have a 200amp service and don't need an automatic transfer switch just manual. Could anyone tell me? Would a 60amp manual transfer switch be OK?

Generator Transfer Switch Install [ 7 Answers ]

I live in south Florida and have a typical home built in 2005 with a 200A service which is fed through the bacck of the meter housing into the breaker box inside the garage. Or I should say, was fed that way. Last year I decided to put in a transfer switch so I could properly hook up my generator...

Generator transfer switch [ 1 Answers ]

How difficult is it to install a generator transfer switch? It's pre-wired, doesn't look too Difficult. Is there anything I should look out for? The only thing I'm not sure of is it comes with two 15-amp 1-pole breakers, two 20-amp 1-pole breakers, and one 2-pole 20 amp breaker. How do I tell the...

Generator transfer switch - enough for well pump [ 1 Answers ]

I have a 10hp 5600 generator that I want to connect to a "GenTran 20216 Manual Transfer Switch". It states that this transfer switch has 6 switches (rated 15 amps ea), a handle tie for one 2-pole circuit such as a well pump. My question is this - my well pump is 220 30 amps. Does two switches at...

Generator power transfer switch [ 1 Answers ]

Our power goes off on a frequent basis. If it is off more than 8 hr I need to power up with my own generator 8kw, to prevent spoilage and to run the well. My question is do you have to disconnect the neutral also and run the neutral to the generator or can the neutral be common to both power...

View more questions Search