Help with my submerabile pump problem

mtskidds Posts: 5, Reputation: 1

New Member

Aug 27, 2012, 04:22 PM

Help with my submerabile pump problem

Did I wire my pressure switch two wires from pump to the load and two wires from panel to line?

Check out some similar questions!

Frozen pipe from well pump to tank, tank problem, burned out pump? [ 0 Answers ]

Help. Frozen pipes have been heated in 50+ degree housing for the last 10 hours. Tank charge reading 36 PSI (bladder tank), pressure gage reading 40 psi, open valve next to gage and no water. Pressure gage was originally reading zero prior to application of direct heat on pipe. Am I looking at a...

Pump Problem [ 5 Answers ]

Private Message: Re: Are you busy Today, 10:50 AM Untamedhawk New Member Join Date: Oct 2006 Posts: 0 Re: Are you busy --------------------------------------------------------------------------------

Pump Problem [ 10 Answers ]

Dcobb New member join date: jun 2006 Posts: 0 Wellsaver tank -------------------------------------------------------------------------------- Hi speedball1 i have a question for you. I have a well saver 56 gallon pump tank and i'm having some trouble. It's hooked to a one horse...

Well pump problem [ 3 Answers ]

Hi, I bought a house with a well. And the well does not seem to function. Is there a way to diagonose the pump problem? I can see the voltage is applied to the pump. The pressure trigger is at the "on" position since the metal leads touch the base and I measured the voltage on the wires...

View more questions Search

Check out some similar questions!

Add your answer here.