 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No power to my hydro air fan control box
I have A Hydro air fan control made by TACO. It has worked great since it was installed last year. However now the power light is out and neither my AC or heat will come on. I did check all the circuit breakers and they are all fine... any thoughts?
Thank you, Curt |
||||
Check out some similar questions!
Where can I find a diagram for the wiring for the fan control center. I need the whole thing not just the thermostat wiring. White rodges is no help.
I installed ceiling fan remote control I have power coming out but not going in fan will not work could I have a bad receiver
Hello, everyone. I have this power vent kit on my gas furnace: http://www.fieldcontrols.com/pdfs/46285100.PDF Actually, the vent itself is different, but the control box is the same. Sometimes my thermostat turns on the furnace, but the control box won't turn on the blower. I had a...
I have the Hampton Bay exterior lights with the control box that lets you set it for ON or a choice of "on after dusk for...2 hrs, 4 hrs... The box lights up for the selections but not the circuit test light. I placed my volt meter on the wires coming out of the box with it in the "ON" position...
I'm attempting to wire a fan where a light fixture used to be. There are two cable in the power box. Cable one has black, white, and ground. Cable two has black, white, red, and ground. I assume the one with the red goes to the light switch and the other cable continues to other sources...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
