 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Condenser control/circuit board
The fan on my outdoor A/C unit failed to come when the thermostat asked - this problem was intermittent. The HVAC guy diagnosed it as a faulty board. Needing to order the part, he bypassed the board temporarily. The unit is cooling and the fan turns on and off as needed. He mentioned I wouldn't have heat but being August in Florida heat isn't an issue. My question is how safe is this bypass and is there anything I need to watch for until the board is replaced?
|
||||
Check out some similar questions!
My previous moter had a 3 wire set up. 1 to the capacitor, 1 to the contactor, and 1 to the circuit board. The new motor has 4 wires diagramed out for 2 wires to the capicitor, and 2 for the line.
p0443 Evaporative Emission Control System Purge Control Valve circuit Malfunction on mazda melinia s 1996 83k?what is the next stip? I cleared the check engine light and it went off ,and after 60miles driving it cames back again?why and how can I fix it ? Also what is the cheapest way to reset...
I have a Lennox G40UH system that is not engaging the inducer motor. I swapped out the inducer and the pressure switch from the downstairs unit and I'm still not getting any power to the inducer. Is there another way to verify if the ignition control circuit board is faulty?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
