Ask Experts Questions for FREE Help !
Ask
    Allenguy's Avatar
    Allenguy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 25, 2012, 08:11 AM
    No power to Honeywell Thermostat
    My AC is not running because I don't see display on my Honeywell Thermostat. I went up the attic to check on the blower and I don't see the green light indicating the blower is on... Do you think it is the capacitor is dead or the fuse?

    Thanks for your help.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Aug 25, 2012, 09:03 AM
    Your thermostat may have internal batteries that need changing. Cover should snap off.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I'm replacing a 23 year old manual Honeywell thermostat with a new digital Honeywell [ 1 Answers ]

I'm replacing a 23 year old manual Honeywell thermostat with a new digital Honeywell thermostat model RTH111. The old thermostat has two wires (colors white and red) but no designation on the terminals. This is for a hot water baseboard gas fired boiler. Which terminals do these unmarked wires...

No power on Honeywell Chronotherm IV Plus thermostat [ 1 Answers ]

There is no power on our Honeywell Chronotherm IV Plus thermostat. There is no battery to replace when I removed the unit from the base in the wall. Where is the problem? Would appreciate any help.

AC Power Issue with Honeywell RTH7400 Thermostat [ 11 Answers ]

I've installed a Honeywell RTH7400 thermostat on a heat pump system with electric resistance auxiliary heat. The thermostat is properly wired and programmed but would not operate properly. It would run the heat pump for less than a minute and shut the system down. After an hour with...

No power to Honeywell Thermostat [ 2 Answers ]

The Honeywell thermostat for my Ac unit does not have any power. I checked all the breakers and they have not been tripped. I can not tell if it has a battery. Any suggestions?

Installed Honeywell RTH7400 Thermostat but get no power [ 2 Answers ]

I have tried to comb through the threads to find a problem that fits mine, but I didn't find it. So please forgive me if this is a repeat question for something that has already been presented. I have just installed 2 Honeywell programmable thermostats (RTH7000 series). The one for my...

View more questions Search