Ask Experts Questions for FREE Help !
Ask
    jzallen's Avatar
    jzallen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 22, 2012, 03:48 PM
    Install Oaety Flange Spacer kit
    Do I need to use silicon?
    Which way do the center funnel-like openings in the gaskets gaskets point?
    Can I place the spacer directly on the existing closet flange?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Aug 23, 2012, 07:29 AM
    Do I need to use silicon?
    No
    Which way do the center funnel-like openings in the gaskets gaskets point?
    If you're asking what I think you're asking the answer is down.
    Can I place the spacer directly on the existing closet flange?
    Yes
    Good luck, Tom
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove a cast iron toilet flange to install a pvc no hub flange [ 1 Answers ]

Installing Oatey Closet Flange Spacer [ 4 Answers ]

I just purchased a couple of Oatey Closet Flange Spacers to install over a toilet flange. The old flange is too low after installing a new floor and will require two 1/2" spacers. How do you install these? There are no gaskets so how do I seal between each of the spacers and the old flange. Thanks.

Closet flange spacer kit installation [ 1 Answers ]

How do you install an Oatey closet flange spacer

How do I attach closet flange spacer over old flange [ 1 Answers ]

I recently installed a new tile floor in my bathroom, and in doing so, raised the level of the floor. I went out and purchased a closet flange spacer kit and it came with the spacer and two rubber gaskets. I need to know how to attaché these. So I put the first gasket on, then the spacer, then do I...

View more questions Search