[channtas28]

Hey Guys, sorry I haven't been in contact for so long, truth is that I've been away and yes happy to return. That said, lets get straight down to business. I would like some advice on the installation of an automatic feed to my basement boiler system, actually, my six boilers. I currently have the Burnham steam type boilers (6) of them, MGB Series, gas operated, specifically the MGB-75 A.G.A Input BTU HR 75,000, Heating Capacity BTU HR 63,000, I=B=R NET Output BTU HR 55,000 Natural Gas Inlet 1/2". The Flue SIze is 5", Pump Size Supply and Return Tappings 1 1/4" No. Of Burners 2, Elect. IGN & Damper 83.1 and STD. Pilot and Damper is 80.0. What parts/material would I need to purchase, also the wattage. I was told that I would zone valves 2 way, automatic feeds, a Taco switch, please let me know the scope of this operation, also could you send some pictures. I await your response.

Channtas28.

[juggallojed]

A pump on a steam system,, now I'm confused is this the condensate return pump?