No pressure for cold water from well

groshsa Posts: 1, Reputation: 1

New Member

Aug 15, 2012, 09:37 AM

No pressure for cold water from well

We have no pressure for cold water in the kitchen sink. It is a one handle pull out sprayer.

hkstroud Posts: 11,929, Reputation: 899

Home Improvement & Construction Expert

Aug 15, 2012, 10:29 AM

How is hot water at kitchen faucet? How is cold water at other faucets?

Add your answer here.

Check out some similar questions!

Low hot water pressure on a kitchen sink, good cold water pressure [ 4 Answers ]

I have a single faucet sink where the cold water pressure is fine and all other sinks have good hot and cold water pressure. I replaced the kitchen faucet two years ago along with new lines. As of late I'm getting very little hot water pressure along with having to run the water for about 10...

Why does my new water heater trickle out hot water but good pressure on cold water? [ 5 Answers ]

I just had my water heater replaced and was given an energy star eco-friendly unit. But since the replacement, whenever I try to take a hot shower or fill my bathtub, the hot water trickles out almost like the faucet isn't open all the way but it is. The cold water comes out fantastic.

Hot water pressure down in spite of strong cold water pressure. [ 0 Answers ]

I have already cleaned the Megaflo cold water valve unit. The Megaflo Heatrae Sadia is only 3/5 years old. What should I do?

Does the pressure from the hot water tank effect the pressure of the cold water? [ 2 Answers ]

We have very low water pressure at our kitchen sink from both the cold and hot water faucets, but no problem with the water pressure to the bathroom or washer. The cold water tank is closest to the kitchen and the hot water heater is near the bathroom and washer. Someone told my roommate that there...

Cold water pressure is lower than Hotwater pressure [ 1 Answers ]

In the bathroom sink, I see the hotwater pressure is very good . When I open the cold water it is very low. It is was fine 2 weeks ago. What could be the problem? Thanks Asaad