 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have 3 older (T12) Lithonia lighting fixtures that all behave the same way. When wired to the light circuit in each case the inner two bulbs light up the outer two bulbs do not. If just the inner two bulbs are wired to the circuit, they light as expected. If just the outer two bulbs are wired...
Replaced a ballast and bulbs in a fluorescent light fixture and now the bulbs flash what is causing this
We're installing 2x2 drop ceiling in a laundry area and are considering lighting options. Standard fixtures will not give quite enough light. We do not really care for can lights. I think we could put in 2x4' fluorescent drop in fixtures in the 2x2 grid, but the spacing is not quite right. Anyone...
I was given two 4-tube fixtures, which when removed from old location were supposed to be working fine. I have the same problem with both. This fixture has a Magnetek Ballast 780-LR-SLH-QP. It has 4 wires open. 110v applied to the Black and White lights 2 tubes. At the other end of the ballast are...
I have a problem my friend has a fluorescent light fixture when he turn on the lights they stay bright for a while and then they go dim. This is what I did so far I change the Ballast light clips and the blubs but I am still having the same problem. Is there anything I might be over looking ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
