Ask Experts Questions for FREE Help !
Ask
    diddle4321's Avatar
    diddle4321 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 13, 2012, 07:07 PM
    Motor rating
    I have a cart weighing about 180kg, I want to automise it by using a AC motor to run the cart by using a gear connection, the speed of the cart is 1m/sec, the connectivity between the motor shaft and the wheel of the cart is by gear meshing, can I get help to do the calculations for the required AC motor

Check out some similar questions!

I have a system with four motor 50 HP, 40 HP, 5 HP, and 7.5 HP. Tell me MCB rating. [ 2 Answers ]

I have a system with four motor 50 HP, 40 HP, 5 HP, and 7.5 HP. Tell me MCB rating for that system.

What is difference in va rating ans watt rating [ 1 Answers ]

RUUD Blower Motor Replacement - how important is the FLA rating? [ 1 Answers ]

Motor on my RUUD gas upflow 90% furnace (~10 years old) just fried itself. Grainger has a motor that is equivalent in all ways except one - the full load amps (FLA) rating. The existing motor is a GE 115VAC 1/2hp 1050 RPM model 5KCP39KG R911. The Grainger motor has a FLA rating of 7.8A, and...

Electrical outlet rating vs. Circuit breaker amperage rating [ 5 Answers ]

Hello to all, I am new to this forum, please excuse me if this question has been answered. I just bought a Thermal Dynamics Plasma cutter. It has a Nema 50-P plug end on it, which I assume is to be plugged into a Nema 50-R outlet. In looking in my reference book, this is a 3 wire...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.