 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heil furnace
Have a 22 yr old Heil direct vent furnace with spark ignition. Inducer fan runs but there's no spark. New ignition module and ignitor. Checked all wire connections. Checked pressure switch, works. Read 24 volts at module connection. No output at spark connection. Help please.
|
||||
Check out some similar questions!
My furnace is a heil model ntc6100gfa1 and it gets power but won't come on what are the possible problems
How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? I had a airconditioner installed in August and for some reason they unhook my hrv so now the hrv turns on but doesn't request the furnace fan to come on. So now it's not circulating the air in my house properly. I...
I hear a hissing noise coming from the inducer motor and the pilot does not come on what can the issue be
I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...
I have bought a house with a furnace and I cannot get the pilot to light. I am asking for some type of manual so I can figure this out. The model is VG-80MD-1 and the serial is H73838067. The house was built in 1977 and I am sure this is the original Thanks for any info
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
