 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
If the CEL comes on for 2 seconds and then goes out, when the ignition switch is turned to Position II, then focus on the distributor. Normally, replacing the Ignition Control Module (ICM) and coil solves the problem. Apply silicone heat transfer compound to the back of the new ICM.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
So recently I have been having starting issues with my Accord. At first it would only happen in the morning when it was cool and wet out(not sure if moisture has anything to do with it). But now more recently every time I try to turn on my car it takes a number of twists of the key before the...
I need to know which buttons to push on the remote to start a 1996 Honda Accord
When I turn the key I hear a single click what does that mean... help
Hey All, Any advice is greatly appreciated! I have 1996 Honda Accord LX. Every now and then (during the last couple months) my car will not start. It won't crank over or nothing. I've tested the battery and seems to be fine. I even thought it was the alarm/killswitch but there are no clear...
Car will not start in the morning. Afternoon starts OK.Took car to local repair shop started OK. Brought it home next morning same problem. Nogo. Any ideas. Thanks, ...
View more questions Search
|
