Ask Experts Questions for FREE Help !
Ask
    erson83's Avatar
    erson83 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 5, 2007, 10:12 PM
    Can start up but after a few hours later,the screen went blank
    Hi everyone...

    I have got a problem with my computer, recently , I will switch on my computer in the night till next the morning, but now, there is a problem. The next morning I woke up, I see that my computer screen went blank, a "no signal input" message is displayed. However, my fan is still running, and the lights indicator are still on, seems that my entire system is running except my computer screen. It usually won't happen until when I left it there for a few hours.

    Could it be my graphic card or my mother board that is giving this problems? Hope I could get some answers here... thanks :)
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
     
    #2

    Mar 6, 2007, 07:14 AM
    Sounds like something is wrong with the sleep mode.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blank Screen at start up [ 1 Answers ]

Hi all, I have recently upgraded my PC at home and built it all myself in my existing case. I offered my friend my old parts etc. and I offered to build him a PC out of the old parts (seeing as I had been so successful with my PC :confused: ). All that has been added that is new is a HDD &...

Blank screen on start up [ 3 Answers ]

OK... I built my comp w/ a iwill kd266 & amd tbird 1.1 ghz I recently opened to add a dvd drive and when I reconnected everything and turned it on, the screen remains blank... 512 mb SDRAM 80 gb hd 52x CD-Rom 16x DVD-Rom 48x CD-RW ati radeon 7000 64 mb pci soundblaster 5.1 belkin 10/100...

Blank screen [ 3 Answers ]

While on the internet my computer froze up and when I did control alt delete my screen went blank with all wavy lines. I shut the machine off and sbooted up again only to get the blank screen with wavy lines. No matter what I try I cannot get to my desktop. Can anyone help? :eek:

Blank screen at start-up [ 2 Answers ]

At each cold start, the screen remains blank. Only after two restarts or resets, screen comes up and everything works correctly.? Have put in another videocard (GF2) and then monitor display came up at first try. Then tried my videocard (GF4Ti4200) in another PC and worked properly as well....

Blank screen at start up [ 4 Answers ]

Hi, I recently swopped hardware of a P133 PC with that of a P200 PC. What I really changed was the processor of the p200 and move a hard/dr from a P100. After connected properly, the screen just became blank. I have checked the memory modules, the h/d and all. Could the processors be dead? But...


View more questions Search