 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I had a pretty good leak and after replacing two of the washers from the repair kit, and putting the shower symmons valve back together the water will not shut off when I turn the control handle/valve all the way to the off position? Is there another internal part that is not working correctlu or...
I have a Symmons Temptrol with a problem. I recently installed an on demand hot water heater and when I was done, I can't get a hot bath. Really hot shower, but not a hot bath. I am trying to get the T-31 knob off and I can't get it off the spline on the TA-10. Been there 30 years. Any...
I have the above diverter in my bathroom. Recently it started to leak from the diverter handle that changes the use from tub to shower. I purchased the Symmons TA-25A Iverter Spindle to replace old. My problem is that I do not know how to remove the old spindle. Can anyone help me with my problem?
This is a symmons-temptrol. Leaking only at the tub spout. I don't know the model number but it is able to divert to either shower or tub. The tub spout leaks. What internal part should be replaced. I have a schematic listing parts T1 all the way to T55-c. The parts are further grouped in several...
Hello, I purchased a TA-10 to replace the spindle in my Symmons '76 Temptrol Model A. After removing the original spindle I notice that the replacement part is different. Namely, there is no thread on the largest circumference part on the replacement part whereas the original has a thread....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
