Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What is the correct way to measure for 220v on a multimeter at a wall outlet?
[ 22 Answers ]
I am trying to install a tankless 220v hot water heater in my kitchen. There is a 220v outlet on the backsplash of the counter that was there when I moved in and have never used. I plan to use this as a 220v source. When I put the meter to the bare copper ground and 1 wire on the outlet I read...
Laundry room dedicated outlet - what amperage.
[ 4 Answers ]
Hello all - I just noticed that after re-wiring my laundry room a few month ago, instead of putting the washer/gas dryer on a dedicated outlet, they share a 15 amp circuit with the TV room outlets/lights. Obviously, I don't want to maintain this mistake any longer. When I ran wiring for the new...
What is correct amperage for All electric Heat Stripps?
[ 4 Answers ]
What amperage are 15 kw heat stripps suppost to run at,, Right now they are running at 21 amp,, is that to high
Testing outlet amperage with multimeter
[ 2 Answers ]
Can you test the actual amperage of a 120v home outlet with a multimeter? When I plug in an appliance over 10amps in the 15amp outlet, the GFI kicks off. I want to test the outlet to see exactly how many amps are available. Thanks
Electrical outlet rating vs. Circuit breaker amperage rating
[ 5 Answers ]
Hello to all, I am new to this forum, please excuse me if this question has been answered. I just bought a Thermal Dynamics Plasma cutter. It has a Nema 50-P plug end on it, which I assume is to be plugged into a Nema 50-R outlet. In looking in my reference book, this is a 3 wire... View more questions Search
|