Ask Experts Questions for FREE Help !
Ask
    Josh34's Avatar
    Josh34 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2007, 02:59 PM
    Heater Problems
    I'm having a problem with my heater, when I turn it on, the outside a/c compressor comes on and trips the breaker. The a/c works fine by itself. Could this be a problem with my thermostat?
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Mar 5, 2007, 03:37 PM
    No, you probably need to call a service company. It could be as simple as a bad dual capacitor to a bad compressor.
    jake4's Avatar
    jake4 Posts: 29, Reputation: 1
    New Member
    		  
    #3

    Mar 5, 2007, 08:01 PM
    Is this a heat pump
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Baseboard Heater Problems... Help! [ 16 Answers ]

I have wired two Marley electric baseboard heaters (240v) to a Programmable Thermostat. The problem is, nothing is working… Here are the stats: BASEBOARDS Baseboard #1 is 3 feet long, 3.1 amps & 750 watts. Baseboard #2 is 4 feet long, 4.1 amps & 1000 watts. WIRE & CURCUIT BREAKER I...

Plumbling problems or hot water heater [ 3 Answers ]

When I turn my hot water faucets on I have no water coming in at all, but I have hot water in the hot water tank.

Problems with Heater & thermostat wiring. [ 4 Answers ]

I have a single package air conditioner. I have wired up the unit and the cooling system works fine, but the heating is confusing me. The heater coils are working but the control circuit or thermosat is not right. When you turn the heat on the fan starts and you can feel the heat. After about 60...

Heater problems [ 1 Answers ]

Hi I am a new user of this site so hello everyone I do however have a question, I have a concord gas heater and it will not come on unless I flip the power switch on and off to override the error code the code light is flashing six times. When the heater comes on it only stays on for a short...

Water Heater problems [ 8 Answers ]

Pilot went out, no problem relighting. BUT when I turn up the thermostat, the flame gets out of control and escapes from the two protective doors. It has started melting the plastic on the outside of the tank around the drain valve.

View more questions Search