 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
tub shower conversion with steel studs
I am converting a tub to shower. I have moved the drain and converted to 2". Now my problem is I have Steel Studs and concrete floors. Do I place Hardi board to floor and then do the pan or do I place 2x6 in between the metal studs do pan then hardi. The reason I ask is that it would be impossible to get the boards between the studs to be plum and where the steel studs attach to the floor stud there are screws that hold the studs.
|
||||
Check out some similar questions!
Hello everyone, My wife and I just moved into an old (1930s) Spanish house in Los Angeles. We have 2 bathrooms, with the master bathroom containing a bathtub and a separate shower stall. The shower stall is tight with a low ceiling and the bathroom has no exhaust fan (only 2 windows) and...
Is there a small tub available to install in a shower stall
We need to remove a standard 32x60" tub and replace with a shower. Is it possible to use the existing tub drain and simply slope the shower floor or is it essential to have the shower drain in the center? Thanks
Advice for putting in the enaeled steel tub in place of the fiberglass tub and shower unit? Also, from those with experience on getting the fiberglass unit out-Sawsall, etc. Steps you used and where to start sawing first? Thank you, one and all. GJ
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
