 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Well water... low/no water pressure
We have a well... house built in '82. Pressure was fine, even this morning... now it's hardly anything. The pressure gage is on 10 (that's as low as it goes). Do you think my well is dry, something wrong with the pump or something else. Any advice would be greatly appreciated!
|
||||
|
||||
|
Lotsa things can cause your problem. The first thing to check is the power at the breaker box, If the breaker's not opened check the power at the control box. Are the points closed? Is the pump running? What type of
Pump do you have? Its age? Back to you. Tom |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a single faucet sink where the cold water pressure is fine and all other sinks have good hot and cold water pressure. I replaced the kitchen faucet two years ago along with new lines. As of late I'm getting very little hot water pressure along with having to run the water for about 10...
I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.
Low water pressure copper pipe low at all fixtures and faucets. City has checked pressure. They installed new shutoff in streetalso. They checked meter and was OK. I am orignal owner feed from street is 3/4".copper house also. House built in 1972. Problem started 6 months ago. I am at whits...
View more questions Search
|
