 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Running just ac from a heat pump
A friend tried to switch out his condenser unit with a heat pump. It's 2 wires coming from the air handler, and 5 on the heat pump. B, W, O, Y, R.. How can we run it for just air? Can he just hook the 24v straight to the contactor?
|
||||
Check out some similar questions!
I have a heat pump that is not running. The indoor blower comes on at both heating and cooling mode. Capacitor is good, The error or fault code light flashes 4 times. What does this mean? This is on a Haier system. Any help would be great. Thank you
My heat pump runs continually inside in heat mode but the fan motor outside won't run. If I make it cooler in the house (65 or so) it will run properly. If the a/c is on and I lower it to 70 inside the outside motor won't work again but the compressor unit runs. Have already replaced fan motor...
How can I tell if my heat pump compressor is running
I turn the heat on set 5 degree above the room temp. the thermalst. Try to kick but neither outside unit nor the blower running. I turn on the fan only the blower run, I replace the new contactor it not run, I try to push & hold the click the system run. Give me some idea, thank you!
I have a heat pump system everything works great. However, why does the fan come on when the system is off? It will run about every 20 minutes and it acts like its going through a cycle. Is this normal? I thought maybe a contact switch but I don't think that it has one. Any suggestions or tell me...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
