Ask Experts Questions for FREE Help !
Ask
    doug336's Avatar
    doug336 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 2, 2012, 02:17 PM
    Lighted toggle switch wiring diagram
    The toggle switch I installed flickers when off. What, is there a problem with the way I wired it?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Aug 2, 2012, 02:18 PM
    That is hard to say since we have no idea how you wired it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rotary switch wiring diagram [ 4 Answers ]

I purchased an old rotary switch, unfortunately without a wiring diagram. It has four settings (off, low, med, hi), and four wiring poles. Contacts rotate at two levels and connect the poles as shown in the attached JPG. My question is how to wire this thing (I assume there are three incoming...

Wiring diagram 2 lights 1 switch (I need) [ 1 Answers ]

But the catch is I already have 1 light working with power in and power continuing to other lights and switches. I want to add 1 more light and 1 switch to control these 2 lights. PLEASE HELP. THANKS

Wiring a 3 way pilot lighted switch [ 3 Answers ]

I have purchased a 3 way pilot lighted switch to control the garage lights from inside my home. This is to replace an existing 3 way switch. The difference between this switch and a normal 3 way switch is the 4th wire for the nuetral to run the pilot light. I don't have a neutral in this box...

Wiring diagram for key switch on a LX172 [ 2 Answers ]

Some of my wires have come loose on my key switch and don't know where they go, does anyone know where I can get a wiring diagram for LX172

View more questions Search