Ask Experts Questions for FREE Help !
Ask
    dand22's Avatar
    dand22 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 31, 2012, 06:44 PM
    Haban pull behind mower
    Looking for info/manual for habanpull behind mower with 5hp briggs&stratton engine, two blades, 44in cut. Does anyone know where I can find?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 6, 2012, 12:42 PM
    Hi,
    Haban went belly up years ago. There are some dealers and distributors that have aftermarket parts available. Try the search engine of your choice. I have seen the breakdown on a 42" mower and it looks like it is repurposing Murray parts.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pull Cord won't pull on my Briggs and Stratton 650 Series push mower [ 5 Answers ]

Ok here goes... The pull cord is stuck. Its pulls out about 4 inches then the cord stops. Looking into the cord area ontop of mower, I notice a small white plastic piece getting caught in a notch built into the cord housing. Now... when I loosen the cord a little bit, I can slide a butter knife...

Pull cord won't pull on Murray 2.0 mower [ 7 Answers ]

I have a Murray/Briggs 6.0 engine mower and the pull cord is sticking. It will stop after pulling about 4 inches. Then if I jiggle the pull cord it will extend another 4 inches. I can see a plastic piece that seems to be stopping it at every four inches. What is causing this and what is the repair...

I can't pull the pull cord on my lawn mower [ 2 Answers ]

I can't pull the pull cord on my briggs & straton

What type of mower does the Haban Model #24577 fit? [ 1 Answers ]

What type of mower does the Haban Model #24577 fit?

Mower want pull [ 2 Answers ]

I have a Troy-bilt self-propelled mower model 830, I've had it less than a year, but now it want pull when the lever is down for the self propel, what could be my problem?

View more questions Search