Ask Experts Questions for FREE Help !
Ask
    deloresandverno's Avatar
    deloresandverno Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 30, 2012, 07:13 AM
    Craftsman weed eater repair
    How do I remove the clutch? I have the plate off.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 6, 2012, 12:05 PM
    Hi,
    I remove the spark plug and use a doubled piece of rope as a stop through the hole. There should be an arrow labelled Off on the hub. A punch and hammer could do it, and sometimes a pipe wrench will work.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Weed Eater Repair Tools [ 2 Answers ]

Hello from Arkansas, I am looking for an adjustment tool for the carburetors for the lite weight weed eaters... any ideas where to get one... most people tell me you have to be a dealer to get them... not the regular screwdriver type... would appreciate any help as I have several people bringing...

Recoil on craftsman weed eater [ 1 Answers ]

I need step by step intructions on how to get the recoil back into my weed eater. Someone PLEASE help me.:(

Craftsman weed eater Older one [ 2 Answers ]

It is a 26.2cc Model 358.798130 Serial D3563021 I replaced the fuel line, it is a one (1) fuel line feed to carburater. It ran for aminute or so. Is there a print on this model I can get. Sears wants about 85 dollars to fix. I can buy another one for less than a 100 dollars, and Harbor frieght...

View more questions Search