 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ignition lock
The key sticks and I need to replace the cylinder lock. I was considering going to the junk yard but then I saw one new for 13.99 but it didn't work right. What would you suggest as the right option for the lock cylinder, hoping to keep costs to a minimum but have key working properly also.
|
||||
Check out some similar questions!
I bought a replacement ignition lock cylinder for my '81 accord and was reading the instructions on how to change it out with the old one. Anyway, it said to insert the key and turn to the 'ON' position in order to line up the roll pin to disengage the old lock. If I had the key to turn the lock,...
Hi, my key won't turn the ignition lock. The ignition switch works but not the cylinder. How do I remove the cylinder? My is a 2001 Pontiac Aztek. Thanks; Miguel
The ignition lock on 1997 Prizm is very warm. What does this indicate?
My furnace blinks 3 times repeatedly, it goes into what my furnace describes as "Ignition Lock" then it will restart after 3 hours, what does this mean and how can I change it? The house gets quite cold when it is in lock, and its to cold outside to have this happen.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
