 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower fan (pushes air through vents) will not stay on and run.
JANITROL PHJ030-01A 208/230/1 60HZ CENTRAL COOLING AC AND HEAT PUMP (ELECTRIC). The blower motor will initially come on briefly but will then turn off and the unit will freeze over. I have a new thermostat, SH capacitor (replaced a few weeks ago), and I just bought a start capacitor but not sure if that will have any effect if I replace that as the old one looks new and is not bloated. The condenser fan was replaced on this unit as well as the heat strips all done last year. What relays or switches would cause the motor to either stop running and/or not turn on?
Brenda [email protected] |
||||
Check out some similar questions!
I hae central heating and air, when I turn on the AC with the thermostat it will blow cool air for a short time then slows to no air at all coming from the floor vents. The compressor is still spinning outside and the blower on the inside unit is blowing, but its like no air get through, any...
I have water running through my vents when I run my central air how can I fix the problem
I have a Coleman Evcon model# dgat056bdd. The fan runs but does not blow air through vents. When it first started you could turn off for little while and it would work OK for a little while. Thanks
My outside A/C unit runs fine and the fan inside the house runs fine as well, but there is absolutely no air coming through the vents. I changed the filter but this is about the extent of my A/C knowledge. Can anyone tell me what the problem may be and how to fix it? Thanks!
The fan doesn't seem to be pushing enough air through the vents it feels very shallow what could be causing this?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
