 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Grill Mate BBQ from Rona - won't work after I assembled
Assembled new BBQ closely following instructions - all the right screws in place but no instructions on operating parts. Won't ignite. New filled tank. Ignition button with battery makes a noise but no ignition. Adjusted the 'gap' to required 4-6 mm, but nothing happens. Tried with a match - still no ignition.
Any suggestions welcome! |
||||
Check out some similar questions!
How to you set the rona exterior timer 1506
[ 0 Answers ]
Instructions
Design Of Grill Blade Thickness ( Gravity Louvered Grill Blade)
[ 3 Answers ]
Kindly Design An Gravity Louvered Grill, It is Required For Staircase Pressuriation System Design Thickness Of Blade Such That It Should Lift When Pressure Exceeds 50 Pa,& Close When Pressure Drops 50 pa It Is a 20 Storey Building ( 20 Staircase) System Pressure 50 Pa
Propane BBQ won't work
[ 2 Answers ]
I have a Fiesta Dynasty 450 propane gas BBQ that has decided all of a sudden to not work so well. The problem is that the gas flow to the burner seems blocked. I installed a full 40lbs tank, turned the tank on, and one side of the burner will hiss a bit then fade out, and the other side doesn't...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
