 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
The reset button on top part of burner will not pop out - we ran out of oil and the heater stopped, now with oil replaced we do not know how to start - please help!
Oil coming out of housing where is oil leak coming from
My oil burner at first would not fire off. Changed filters and nozzle. Furnace ran fine for a week or so then tripped off again. Cleaned cad cell and it fired and ran for a day, then tripped off once more. Got it running again but last time burner continued to run after flame extinguised, flooding...
I have looked over troubleshooting pages all morning and now have to ask for help. We Wayne oil burner model moc-80 this summer I install a new oil tank outside, all was checked over and tested working perfectly for the past 2 and a half months. The past few days I noticed the burner thumping a bit...
I have a wayne oil burner in my barn it worked great last year I replaced the electrodes and transformer the end of last winter. Now this year it woudnt light right away so I though it might be low on oil so I filled the small tank I use up and bled the system using the bleeder so air came out...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
