 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Turn on heat pump with only 2 wire for cooling only
I took out a regular condenser and replaced it with a heatpump but I only want to use the cooling only.with only 2 wires from the old connection how do I turn it on... so I got my 2 wire 24 volts to condenser and my board is
o. y1. w1. r. c. l. t. colors are org.yell.wht.red.blk.brn.blu. What do I have to jump on my board to get 24 volt working the cold only?? |
||||
Check out some similar questions!
I have a new Rheem heat pump. The cooling works fine but won't blow hot air in HEAT setting. I have reset the breakers for heat pump and air handler, changed filters and pulled batteries and reset the Braeburn 3000 thermostat. Still blows cold... Any other suggestions?
Carrier package heat pump cooling in heat mode. WHy?
Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump
We have a heat-pump and had to have a new capacitor installed about 2 months ago, because the outside fan would not run. It's been working great ever since until yesterday. I noticed the tempature has elevated and the air flow seems good. I replace filter monthly, and put a new one in again. The...
My central a/c system inside blower will not turn on during cooling it will turn on during heat. Everything else on the system works. My system is over 13 years old.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
