Ask Experts Questions for FREE Help !
Ask
    Murray105's Avatar
    Murray105 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 21, 2012, 04:30 PM
    Replaced light now none on same fuse working
    Hello,
    I replaced two ceiling fixtures on our second floor. I Checked that each worked before completely securing to ceiling and they did. So upon checking the final light before securing (it worked as I said), I then flipped the master breaker off again to finish up(fyi- we have an old fuse panel not a breaker panel). When I turned it back on , the light no longer worked and now none of the lights on that same fuse work! I thought maybe a connection came loose so I undid both lights (which looked fine) and still no luck. The fuse is good still as I swaped it with another I knew worked. Any ideas of what's going on here?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Jul 21, 2012, 09:01 PM
    A Look is only good if u checked to see if the wires inside the wire nut where connected together. It is possible that the wire nut looks good but the wires are not connected.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replaced light switch and now other fixtures quit working, what did I do wrong? [ 3 Answers ]

Replaced light switch in the bedroom, light works in room but it is tied to one breaker which operates the bedroom light, the kitchen light, the porch light and one outlet in the kitchen. The bedroom light works where I replaced the switch but now the other items on the breaker do not work. What...

One light in my track light doesn't work. I have replaced the bulb,still not working [ 4 Answers ]

I have a track light of three mini-floods. (not sure what brand.) I have replaced bulbs before. Now, one end light (never been replaced) is not working. I put a new bulb in, and it still won't work. I have made sure that the connection is still there, and that the individual on/off switch on...

Kenmore elite dryer I replaced the fuse from the check lint light was flashing, it wr [ 0 Answers ]

Check lint light flashing on kenmore elite dryer, I replaced fuse, worked for 1 load and is flashing again, will not run

Kenmore elite dryer I replaced the fuse from the check lint light was flashing, it wr [ 0 Answers ]

I replaced the fuse in my kenmore elite dryer, the check lint light was flashhing, it worked for 1 load and is flashing the check lint light again and will not run

Replaced outlet, now light not working! [ 1 Answers ]

In a basement bedroom I had a dead outlet. I replaced it along with two others, the light switch and the light fixture. Today I realize that the closet light (that I did not touch) no longer works (it is on the same side as the dead outlet- which still doesn't work asfter being replaced). What...

View more questions Search