 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lawn Mower Parts, Small Engine Parts & Much More! | PartsTree.com - Briggs, MTD, Toro, Cub Cadet, Husqvarna, Troy-bilt...
Go to above web site. Scroll down and click on Briggs and Straten in Engines Brands section. Enter model number. In "Search for Parts" Put in "Plug". |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
What is the spark plug settings for a Briggs & Stratton Vtwin 16 HP motor?
Hi, I have an 13hp briggs and stratton ride on mower and it has no spark. I have removed the black kill wire and cranked the engine and still no spark. Does that mean the coil is faulty, or could there be a problem inside were the stator is? Also the two wires going into the stator the red has...
I have a lincoln power arc 4000 welder generator with a Briggs and Stratton engine, the problem I am having is that it will not start? When I check the spark plug it is always wet with gas. When I spray carb cleaner in air filter it will run for a couple seconds and then die back out. I have taken...
Was mowing tall grass when it died. At first there was a small spark at the plug but now there is none. Had been having to use pickup to jump start the Huskee 38" riding mower. Where can I find a schematic for this engine. Model 287707 Type 1224-E1 Code 000531ZD
What is the spark plug gap setting on a 12 hp B&S ? This is an OLD Montgomery Ward PowerKraft rider. Probably late 70's early 80's model.
View more questions Search
|
