 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hot tub will not stay on
My hot tub will not stay on or warm up. I press the button and it turns on and turns off after 10 minutes. Even if the water is very cold. I replaced the control system, HT 1000 Y2K. It still does the same thing. The top panel temperature adjuster keeps spinning in circles. Could that be the cause, the control system not recognizing the temperature setting? Or is it something else?
|
||||
Check out some similar questions!
hi.. I have a electric hot water heater it is only 4 years old. The water will not stay hot after it finally gets hot We can get one shower out of it then we have to push the reset button wait about 15 to 20 hours just to get one more shower out of it and this only works 1 out of 4 times . What...
How do you clean your hot tub when you have had this bacteria (folliculitis)in it. It's the middle of winter(-25 C) and I will not be able to fully empty tub. Is there some chemical you can put in the water? I have maintained proper chemical levels. I use bromine instead of chlorine.
Are there any kits available for adding jets, filter, heating to a claw-foot tub?
I drained my hot tub this winter, vacked out everything and wiped shell dry. Just opened it up as spring has started, and there is a very large crack on a seat going downward, 8-10 inches long. Can't imagine what caused this? Does anyone know? Tub did not have a crack when full. I live in a...
I just changed the water in my hot tub, and now when I power it up to heat the water it runs for a few seconds the GFCI trips and power is lost. This has happened before and seemed to resolve itself after a few tries, but not this time. The hot tub had been operating perfectly well before I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
