Ask Experts Questions for FREE Help !
Ask
    amwwcmww's Avatar
    amwwcmww Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 3, 2007, 02:55 PM
    KENMORE stove won't preheat
    I have a kenmore stove model #75822 when I try to Bake or broil or self clean it will not light most of the time it just clicks about 3 times. Sometimes it will light on the 1st click keeps clicking and the flame goes out but the stove top works fine. Also on bake the oven will not even try to preheat until the temp is at 425 or 450 but even then it still won't light. Sometimes there is an a code that pops up it is e1 f5. What's WRONG?
    jake4's Avatar
    jake4 Posts: 29, Reputation: 1
    New Member
    		  
    #2

    Mar 5, 2007, 08:43 PM
    If this is the stove I am thinking about , couple years old, their was several service bulletins on the burner design and spark module board and also need electrical noise filters
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite won't dry completely [ 4 Answers ]

I have a Kenmore Elite eletric Dryer model #110.64962300. It's only a couple of years old. Everything seems to be working fine but the clothes will not get completely dry. I have taken apart the front kick plate and cleaned out the entire vent hose, and also cleaned out the vent hose leading to...

Kenmore dishwasher won't fill at start [ 1 Answers ]

Start button but water does not come in - when I cancel the start the drain pump starts to try pump water out so that works but the water does not come in at the beginning.

Kenmore Stove Trips 50 AMP Circuit Breaker [ 3 Answers ]

1 Year old Kenmore Stove, Flat Top keeps tripping my 50 AMP circuit breaker. This stove has worked without problem for 1 year without any problems. What confuses me is that the circuit breaker is tripped whether I use the range, the oven, or both at the same time. Could the breaker be bad? To...

Kenmore front load won't do anything [ 3 Answers ]

I have a Kenmore front load model 41741142000. It will not do anything. I had a repair guy come out. He used his ohm meter to trace wiring and no problems. Then he got to the door switch and replaced it with one he had on his truck. He determined the problem was the timer. He said I could easily...

Preheat Hot Water? [ 10 Answers ]

Here is my situation. I am about to install a new electric hot water heater and am wondering if it would make sense for me to feed the new heater from our oil furnaces hot water jacket output, or simply hook it up to the cold water street feed. We typically run our oil furnace about 6 months a...

View more questions Search