Ask Experts Questions for FREE Help !
Ask
    HubertLHodges's Avatar
    HubertLHodges Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 16, 2012, 07:12 PM
    Part for a generator
    Where can I order a carberator for a kenowa tools 8000 generator
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 17, 2012, 06:59 PM
    Hi,
    The engine says DuroMax, who also makes their own generators. Looking reveals that Northern Tool + Equipment sells that brand. Most stores have parts available.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Western gravity furnace generator for model 4G- 75 replacement part number [ 0 Answers ]

Generator part #

Locating a certin part for a kenowa 8000 generator [ 1 Answers ]

I have a kenowa tools 8000 generator, engin model number- 188F. I need a part called a valve spring keeper.Any ideas where to get one?The engine family number is 5CSGS.38925D. On the moter it has the name sanding on it.

Generator wiring: new generator gfci breaker tripping [ 2 Answers ]

Generator wiring: I have a new honda generator. I ran 3 wires from the garage to the transfer switch in the house. When I start up and throw in the breaker on the generator, its GFCI trips immediately. It is a long run (125ft) run to the house and I used heavy wires. But I only ran 3 (blk,...

Connecting Generator to Generator Transformer. [ 0 Answers ]

For connecting 7 MW generator to generator transformer, which is better cable or NSPB ?

I require for a Power Plus 5000 Generator 1 generator under following specifications: [ 1 Answers ]

I require for a Power Plus 5000 Generator 1 generator under following specifications: 5000 Watts, 120V, 1 Phase, 60 Hz at 3600 RPM, 3720 RPM at no-load. Thank you, Publio

View more questions Search